Europe
Cosy
Ski
Lodge
for
Family
with
SOLITEX
MENTO®
3000
connect
&
INTELLO®
Airtightness
System
We can’t rely on ‘It’s fxxxxxx cold! I’m going to bed!’ anymore. We’ve had to change the way we know when it’s time to go to bed so we can get up in the morning for another day’s skiing. Roland
When it’s your own design brief and you know what cold means in the Central Plateau you take time to get it right, without it costing the earth!
Roland Alderton of RJ Alderton Builders in Hamilton has built his adventure-loving family a three-bedroom 98 m2 ski lodge in National Park Village. This holiday home is designed to withstand extreme external weather and the challenging internal moisture demands faced in this climate with wet ski gear. Roland is passionate about energy efficiency and sustainable building practices.
How was this project implemented?
He chose pro clima SOLITEX MENTO® 3000 connect as the Roof Weather Resistive Barrier and pro clima INTELLO® Intelligent Air Barrier along with R-2.6 insulation under the floor, R-5.2 in the ceiling and a combined total of R-3.8 in the walls. These external walls are made up of a 90 mm stud insulated to R-2.6, overlaid with INTELLO®, then an internal service cavity insulated with a further R-1.2, before being finished in a hard-wearing plywood lining.
The service cavity does what it says on the tin – carrying electrical services and occasionally plumbing – but most importantly, the main bulk of insulation in the walls is continuous, untouched (by trades) and performing at its maximum possible rating.
Roland’s next plan is to build a low-energy show home in Hamilton.
We’re right there with you once again Roland!
- Builder - RJ Alderton Builders
