INTELLO® conneX
Connection Strip for the INTELLO® lAB System
Advantages
- 90 days UV exposure during framing
- Optimum prevention of structural damage and mould, even in the event of unexpected moisture intrusion
- Extremely high humidity-variable diffusion resistance
- MVTR-value = 125 MNs/g in a winter climate
- MVTR-value = 1.25 MNs/g back-diffusion capacity in summer
Areas of application
INTELLO® conneX is a UV-stabilised humidity-variable strip that replaces the INTELLO® Connection strip. Installed during framing stage INTELLO conneX is designed to ensure the continuity of the INTELLO® and INTELLO® PLUS Intelligent Air Barrier (IAB) systems at framing junctions. Intended for use at intermediate floor junctions and internal to external wall junctions. It's strong and durable allowing up to 90 days of UV exposure prior to being covered by internal linings or external cladding.
Technical specs
| Material | |||
| Protective and covering fleece | Polypropylene | ||
| Functional film | Polyethylene copolymer | ||
| Property | Regulation | Value | Regulation |
| Colour | Brown | ||
| Surface weight | EN 1849-2 | 300 g/m² | EN 1849-2 |
| Thickness | EN 1849-2 | 1.1 mm | EN 1849-2 |
| sd value, humidity-variable | EN ISO 12572 | 0.25 - >25 m (equiv. air layer thickness) | EN ISO 12572 |
| Vapour resistance (MVTR) humidity variable | EN ISO 12572 | 1.25 - >125 MN·s/g | EN ISO 12572 |
| Flammability index | AS 1530.2 | < 5 | AS 1530.2 |
| UV stability and outdoor exposure | ASTM G154 | 90 days | ASTM G154 |
| Absorbency | AS/NZS 4201.6 | > 100 g/m² | AS/NZS 4201.6 |
| Edge tear resistance MD/LD | TAPPI T470 | 433 N / 298 N | TAPPI T470 |
| Tensile strength MD/LD | ASTM D882 | 7.4 kN/m / 5.5 kN/m | ASTM D882 |
| Heat shrinkage @ 70°C MD/LD | ASTM D1204 | 0.0% / -0.1% | ASTM D1204 |
| Temperature resistance | Permanent -40 °C to 80 °C | ||
